新聞中心
女人张开腿让男人桶爽的>>新聞中心>>冷再生機設備如何用于路面施工
新聞中心
新聞資訊
聯系我們

山東途暢路橋工程有限公司
聯系人:石總
電話:18264104888
地址:山東省濟南市槐蔭區經一路273號群盛華城
冷再生機設備如何用于路面施工
來源:http://www.ayurskins.com/ 日期:2023-05-03 發布人:guanli
冷再生機是指將已經使用過的瀝青路面進行冷再生處理的設備。在路面施工中,冷再生機的應用可以有效提高舊路面的再利用率,降低施工成本和環境污染。冷再生機設備在路面施工中的主要作用是將已鋪設的舊路面進行翻新加工,在這個過程中,冷再生機租賃廠家認為需要注意以下幾個步驟:
Cold regeneration machine refers to equipment that performs cold regeneration treatment on asphalt pavement that has already been used. In road construction, the application of cold recycling machines can effectively improve the reuse rate of old road surfaces, reduce construction costs and environmental pollution. The main function of cold recycling machine equipment in road construction is to renovate and process the old road surface that has already been laid. During this process, the cold recycling machine rental manufacturer believes that the following steps need to be taken into consideration:
清理:在進行冷再生處理前,需要對舊路面進行徹底的清理,將泥土、碎石等雜物全部清除干凈。
Cleaning: Before conducting cold regeneration treatment, it is necessary to thoroughly clean the old road surface and remove all debris such as soil and gravel.
磨削:在清理工作完成后,需要使用冷再生機對舊路面進行磨削,將舊路面銑削下來的碎石和瀝青再次混合均勻。
Grinding: After the cleaning work is completed, the old road surface needs to be ground using cold reactivation, and the crushed stones and asphalt milled from the old road surface need to be mixed evenly again.
加瀝青:在磨削完成后,需要向冷再生機設備中添加新的瀝青,與舊路面的碎石混合均勻。
Adding asphalt: After grinding is completed, it is necessary to add new asphalt to the cold recycling machine equipment and mix it evenly with the crushed stones of the old road surface.


壓實:在瀝青與碎石混合均勻后,需要使用壓路機將其壓實,確保路面平整,緊實。
Compaction: After the asphalt and crushed stone are evenly mixed, a roller needs to be used to compact them to ensure that the road surface is flat and compact.
封面處理:在后一遍壓路完畢后,需要對新路面進行封面處理,以確保路面光滑、防水、耐磨等性能。
Cover treatment: After the final compaction, it is necessary to carry out cover treatment on the new road surface to ensure its smooth, waterproof, wear-resistant and other properties.
需要注意的是,在進行冷再生處理時,要確保設備和工人的安全,合理選取加油點和使用瀝青的方式,同時根據路面狀況合理選取冷再生機的工作參數和參數設置。還有什么不了解的或者有什么需求,都可以隨時來咨詢聯系我們http://www.ayurskins.com!
It should be noted that during cold recycling treatment, it is necessary to ensure the safety of equipment and workers, reasonably select refueling points and use asphalt methods, and reasonably select the working parameters and parameter settings of the cold recycling machine based on the road conditions. If you have any questions or needs, feel free to contact us at any time http://www.ayurskins.com !
下一篇:濕地推土機出現短路問題怎么回事 上一篇:現今26噸壓路機保養存在的誤區!
推薦閱讀/ Recommended reading
- 想做好冷再生技術施工的話要注意什么 2023-05-08
- 濕地推土機出現短路問題怎么回事 2023-05-05
- 冷再生機設備如何用于路面施工 2023-05-03
- 現今26噸壓路機保養存在的誤區! 2023-04-19
攤鋪機的選型必須從四個方面確定
[2018-08-23]
攤鋪機的選型必須從四個方面確定攤鋪機的選型必須緊密地結合道路施工的具體情況和需求,要遵循充分滿足道路質量和合理成本等要求。下面冷再
推薦產品/ Recommended products
女人张开腿让男人桶爽的