在施工工況比較復雜的地區，無論是壓路還是壓地基，都要先把地面弄平一些，這樣才能便于壓路機這些機械開展下面的壓實流程。針對平整這個工作，一種實用的機械設備應運而生，這便是冷再生機租賃廠家今天所要介紹的平地機。

In areas with complex construction conditions, both road and foundation compaction, it is necessary to level the ground first, so as to facilitate the following compaction process for such machines as road rollers. For the work of leveling, a practical mechanical equipment has emerged, which is the grader that the cold recycling machine rental manufacturer will introduce today.

平地機是指利用刮刀平整地面的一種高速、高效、高精度和多用途的土方工程機械。刮刀裝在機械前后輪軸之間，能升降、傾斜、回轉和外伸。動作靈活準確，操縱方便，平整場地有較高的精度，適用于構筑路基和路面、修筑邊坡、開挖邊溝，也可攪拌路面混合料、掃除積雪、推送散粒物料以及進行土路和碎石路的養護工作。

Land leveler refers to a high-speed, efficient, high-precision, and multi-purpose earthwork machinery that uses a scraper to level the ground. The scraper is installed between the front and rear axles of the machine and can be lifted, tilted, rotated, and extended. Flexible and accurate movement, convenient manipulation, and high accuracy in leveling the site. It is suitable for constructing subgrade and pavement, constructing slopes, excavating side ditches, mixing pavement mixtures, removing snow, pushing bulk materials, and maintaining dirt and gravel roads.

公路路基，是路面的基礎，是公路工程的重要組成部分。路基承受由路面傳來的交通荷載，是路面的支承結構物，它必須具有足夠的強度、穩定性和耐久性。根據地形的不同，公路路基一般采用路堤和路塹兩種形式。

Highway subgrade is the foundation of pavement and an important component of highway engineering. The roadbed bears the traffic load transmitted from the road surface, and is the supporting structure of the road surface. It must have sufficient strength, stability, and durability. According to different landforms, highway subgrade generally adopts two forms: embankment and cutting.

平地機有如下兩個主要作用：

The grader has the following two main functions:

1、將道路橫坡刮到符合設計要求。

1. Scrape the cross slope of the road to meet the design requirements.

2、按照道路縱坡的要求，將路面刮到平整。

2. Scrape the road surface to a level surface according to the requirements of the longitudinal slope of the road.

為了將路面刮平，就要求操作人員注意以下幾點：

In order to smooth the road surface, the operator is required to pay attention to the following points:

1、機器一定嚴格按照道路縱向軸線的平行方向行駛；

1. The machine must travel strictly in parallel to the longitudinal axis of the road;

2、嚴謹邊刮便于扭轉方向；

2. Strict edge scraping facilitates reversing direction;

3、要根據前輪經過的起伏情況適時調整刮刀高度，尤其前輪經過沒有覆蓋的雨水井、污水井等的時候，更要降低速度、調整刮刀，避免前輪猛然降低而使得被刮路面形成凹坑；

3. Adjust the height of the scraper according to the undulation of the front wheel. Especially when the front wheel passes through uncovered rainwater wells, sewage wells, etc., it is necessary to reduce the speed and adjust the scraper to prevent the front wheel from suddenly lowering and causing pits on the scraped road surface;

4、要根據機器經過橫斷面橫坡狀況適時調整刮刀橫向角度，使得橫坡符合設計要求；

4. Adjust the lateral angle of the scraper according to the cross section and cross slope conditions of the machine, so that the cross slope meets the design requirements;

5、對于一刀不能完全覆蓋的路面，最好沿著同一個方向，有中間向兩邊往復推進，每刀之間要有交叉；

5. For roads that cannot be completely covered by one knife, it is best to push back and forth in the same direction from the middle to both sides, with intersections between each knife;

6、對于較厚處的刮平，要有耐心，一層一層逐漸刮到設計高度，避免一次性下刀太多，這樣往往會造成刮面粗糙，甚至出現大的凹坑。

6. For scraping thicker parts, it is necessary to be patient and gradually scrape one layer at a time to the design height to avoid too many one-time cuts, which often leads to rough scraping surfaces and even large pits.

平地機可以完成公路重要內容場、農田等大面積的地面平整和挖溝、刮坡、推土、排雪、疏松、壓實、布料、拌和、助裝和開荒等工作。是礦山建設、道路修筑、水利建設和農田翻土、平整工作等施工中的重要設備。您有需求隨時聯系我們http://www.ayurskins.com！

The grader can complete the leveling, trenching, slope scraping, soil pushing, snow removal, loosening, compaction, cloth distribution, mixing, loading assistance, and reclamation of large areas of land such as important highway sites and farmland. It is an important equipment in construction such as mine construction, road construction, water conservancy construction, and farmland soil turning and leveling. Please feel free to contact us if you have any needs http://www.ayurskins.com ！